KILZ 1-Part Epoxy Acrylic Concrete & Garage Floor Paint
by KILZ · Single-component water-based epoxy
The maker's figures
- Finish
- Slip-resistant satin“Slip-Resistant Satin Finish”
- Coverage
- 300–500 sq ft per gallon“Coverage 300-500 Sq. Ft./Gal.”
- Cure time
- 72 hours to full cure“Wait 24-48 hours before light foot traffic and 72 hours to full cure.”
- Drying time
- 1 hour to touch; 4–6 hours before recoating“Dries to touch in 1 hours. • Wait 4-6 hours before recoat.”
- Product type
- Single-component water-based epoxy“KILZ® 1-Part Epoxy Concrete & Garage Floor Paint is a single-component water-based epoxy.”
- Application method
- 3/8-inch nap roller, pad applicator, nylon/polyester brush, or airless sprayer“Apply a thin, even coat using a 3/8" nap roller cover, pad applicator or a nylon/polyester brush or an airless sprayer (.015"-.021"spray tip, 60 mesh filter).”
- Surface compatibility
- Horizontal surfaces such as garage floors, driveways, basements, and porches; also porous concrete, masonry, stone, and brick“Can be applied to interior/ exterior surfaces such as porous concrete, masonry, stone and brick. For use on horizontal surfaces such as garage floors, driveways, basements, porches and pool decks.”