Outdated Drivers Are Slowing You Down
Outbyte Driver Updater · freeOne free scan finds every outdated or missing driver and matches the right update for your exact hardware.
Scan My Drivers Free →ThatPainter is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
Get Together is a 75-1/2-inch-square throw quilt by Diane Tomlinson. The quilt-along ran from February 17 through April 20, 2020, but you can still make the project by obtaining the pattern through the American Patchwork & Quilting/AllPeopleQuilt edition, a printable PDF, or a shipped pattern booklet. It combines strip-pieced Nine-Patches with square-in-a-square and Flying Geese sections, and the latter two sections can be foundation-pieced or made with traditional methods.
How to get the Get Together pattern
The original quilt-along is no longer an active weekly event. The official listing identifies three ways to obtain the instructions:
- Purchase the April 2020 issue of American Patchwork & Quilting.
- Buy the printable downloadable PDF.
- Buy the shipped pattern booklet.
Current stock, prices, and marketplace availability are not established here, so check the American Patchwork & Quilting/AllPeopleQuilt listing before ordering. The page notes that the patterns were technically edited and quilt tested.
What the quilt looks like and how it is built
The throw uses three main components:
- Nine-Patch units made efficiently from strip sets.
- Square-in-a-square blocks.
- Flying Geese sections arranged with sashing and borders.
The ten-part sequence moves from color planning and strip sets through cutting, Nine-Patch assembly, the two additional block types, quilt-center assembly, borders, paper removal, and binding. A design wall or clear floor is useful for arranging blocks; photograph the layout before sewing so the placement can be recreated.
#1 Best Overall
Can you make Get Together from scraps?
Yes. The pattern specifically supports a scrap approach for the Nine-Patches. The stated cutting quantities are:
| Scrap category | Cut size | Quantity |
|---|---|---|
| Medium/dark fabrics | 1-1/2-inch squares | 725 |
| Cream fabrics | 1-1/2-inch squares | 580 |
Sort scraps by value before cutting so the medium/dark pieces remain distinct from the cream background. Neutral cream or gray thread works across a mixed-color selection. Prewashing is optional; if a fabric is likely to bleed, test a swatch in soapy water for 30 minutes and continue cold-water prewashing until the dye stops releasing color.
Rank #2
- Orders are despatched from our UK warehouse next working day.
Do you have to foundation-piece it?
No. Foundation piecing is optional for both the square-in-a-square and Flying Geese sections.
Foundation-pieced option
Paper foundations help control the small, elongated shapes and are the route shown for the distinctive Flying Geese arrangement. Remove the papers carefully from the center outward after the blocks are assembled. A light mist of water can soften stubborn paper, but avoid saturating the fabric.
Rank #3
- DAVID & CHARLES BOOKS-Jelly Rolls are the new fat quarter bundle! They consist of 1
- 5 inch strips of color coordinated fabric, rolled up to create a solid disk and tied with a ribbon
- Jelly Roll Quilts is the first book to show quilters the best ways to use these desirable and labor-saving fabric packs
- Learn how to make 16 quilts, perfectly suited to the color coordinated rolls, as well as a variation in color way, style or size for each project
- Jelly roll quilts are suitable for quilters of all abilities, especially those with a passion for fabrics
Traditional piecing option
Traditional square-in-a-square construction uses more fabric. Traditional Flying Geese make six units per sashing unit, while the foundation-pieced version makes nine skinny, elongated units; therefore, the finished appearance changes as well as the cutting requirements. Choose traditional methods when you prefer less paper handling and have room for the extra fabric and altered geometry.
Cutting and piecing practices that protect accuracy
- Install a fresh rotary-cutter blade and square one short edge of every strip set before subcutting.
- When cutting segments, align the ruler’s horizontal line with the center seam.
- Use an accurate 1/4-inch seam throughout; even small errors accumulate in a quilt with many units.
- Chain-piece repeated units to reduce thread changes and save time.
- Nest adjoining seams and press in the direction specified by the correction: Diagram 2 seams should be pressed toward the medium/dark fabric to reduce bulk.
- Use a ruler grip or non-slip adhesive if the ruler shifts. An ergonomic rotary cutter can reduce wrist strain during the large amount of strip cutting.
The project page also identifies the AccuQuilt GO! Fabric Cutter with the 1-1/2-inch strip die 55024 as an option; it states that this setup can cut up to six fabric layers at once. Follow the cutter manufacturer’s layer and safety limits.
A practical sequence for the ten-week project
- Plan color and value. Separate cream backgrounds from medium and dark prints, then decide where high-contrast or directional scraps will sit.
- Make strip sets. Sew the required strips with a consistent 1/4-inch seam and press as directed.
- Subcut segments. Square the strip-set edge, align the ruler to the center seam, and cut accurately.
- Assemble Nine-Patches. Chain-piece where possible, nest seams, and press to keep intersections flat.
- Construct square-in-a-square blocks. Use the foundation or traditional method you selected, allowing for the different fabric demands.
- Construct Flying Geese. Foundation piecing gives the nine-unit elongated look; traditional piecing changes the unit count and appearance.
- Lay out the quilt center. Arrange blocks and sashing on a design wall or open floor, photograph the arrangement, and then sew rows or sections.
- Add borders. Measure the completed center before cutting border strips; average measurements from both sides and the center to accommodate minor variations.
- Remove foundations and prepare the top. Pull papers from the center outward, clip loose threads, trim dog-ears, confirm the top lies flat, and press it.
- Quilt and bind. Layer with correctly sized backing and batting, quilt, then finish the edges with binding.
Finishing requirements
Backing and batting
Cut backing at least 4 inches larger than the quilt top on every side. Select batting according to the quilt’s intended use and washing requirements rather than appearance alone.
Free tools Windows power users keep installed
One-click scans. No signup required.
Quilting design
Match the quilting to the recipient and expected care. An allover design is practical for a frequently washed child’s quilt, while an heirloom may warrant more elaborate work. Orange-peel quilting is presented as a domestic-machine option that echoes the Nine-Patch design.
Best Value
Binding and care
Before quilting, make sure the top is flat and free of stray threads. When washing the finished quilt, a Color Catcher can provide extra protection if any fabric remains prone to bleeding.
What the 2020 quilt-along format offered
The original event divided the work into weekly installments and used a private Facebook group for participants. Makers also shared progress on Instagram with #APQQuiltalong. You can reproduce the structure independently by setting a weekly cutting or piecing goal, photographing each layout, and keeping your chosen method—foundation or traditional—consistent across matching units.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
