Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →
ThatPainter is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
Au.diBoard VoglFuge is a continuously perforated acoustic plasterboard ceiling system made for a flush, designer finish. Its defining feature is a patented strip-tape-and-glue joint instead of compound filler. When the panels, CD 60/27 suspension, insulation, services, movement joints and paint system are designed as one assembly, the result is a seamless-looking ceiling with controlled sound absorption and a wide choice of perforation patterns.
What Au.diBoard VoglFuge is
Au.diBoard VoglFuge is not a loose acoustic tile. It is a suspended gypsum-board ceiling assembly in which perforated 12.5 mm panels are fixed edge to edge and finished to appear continuous. Vogl describes the system as a seamless perforated acoustic gypsum-board ceiling; Atkar describes the patented process as strip tape and glue at panel joints instead of compound filler.
As an Amazon Associate I earn from qualifying purchases.
That joint technology is the main reason designers specify VoglFuge. The tape-and-glue process is intended to shorten finishing work and improve resistance to cracking compared with a conventional filled plasterboard joint. The claim applies to a correctly installed system, not simply to any perforated board attached to a ceiling.
Behind the visible surface are suspended CD 60/27 primary and secondary profiles, fixings, acoustic insulation, independently supported services, access provisions and planned movement joints. The ceiling therefore has to be documented and coordinated before panels arrive on site.
#1 Best Overall
- COMPLETE 5-PIECE BRUSH SET FOR EVERY PAINTING TASK — Includes 1 Inch Flat, 1.5 Inch Angle, 2 Inch Flat, 2 Inch Angle Stubby, and 2.5 Inch Angle brush giving you every size professional painters use daily. Get all 5 for less than the price of a single brush from hardware store brands — professional grade performance at a fraction of the cost. Perfect for walls, trim, cabinets, doors, furniture, and detailed cutting-in work on any project.
- ZERO BRISTLE LOSS — GUARANTEED BY PRECISION ADHESIVE BONDING — Every bristle is locked in place with precision-set adhesive that keeps them in the brush — not in your paint job. The coated steel ferrule provides structural support while the adhesive bond ensures clean performance on every stroke. Premium SRT synthetic filaments load more paint and release it evenly for a smooth streak-free finish on walls, ceilings, and trim. Works with latex, oil-based paint, primer, sealer, and wood stain.
- INCLUDES THE ANGLE STUBBY MOST SETS LEAVE OUT — Professional painters know the 2 Inch Angle Stubby is the go-to brush for tight cabinet interiors, window sashes, inside corners, and detailed trim where standard angle brushes are too long. Combined with the 1.5 and 2.5 inch angle sash brushes you have precision cutting-in covered at every scale — baseboards, crown molding, door casings, and ceiling lines.
- FLAT BRUSHES FOR BROAD SMOOTH COVERAGE ON ANY SURFACE — The 1 and 2 inch flat brushes deliver even coverage on walls, furniture, shelving, doors, fences, decks, and wood surfaces. Ideal for applying primers, stains, varnishes, polyurethane, and specialty coatings. Solid wood handles provide all-day comfort and control for both professional contractors and weekend DIY homeowners tackling interior or exterior painting projects.
- TRUSTED BY PROFESSIONAL PAINTERS AND CONTRACTORS NATIONWIDE — Pro Grade delivers professional-grade results at a price that makes sense for crews who go through brushes on every job. Ideal for property managers, remodeling contractors, apartment turnover crews, maintenance teams, and commercial painting operations. Backed by thousands of verified reviews from working painters. Washable and reusable for multiple projects.
Start with the acoustic and visual brief
Define the room’s sound target
Begin by identifying how the room is used: speech-focused, music, hospitality, education, workplace or circulation. The perforation pattern, open area, insulation depth and room geometry all influence the acoustic result. Published material for the system does not provide one universal absorption value for every pattern and finish, so the project team should obtain the performance data for the exact selected panel and backing build-up.
Choose the appearance before ordering
VoglFuge panels are supplied in standard perforation profiles and can also be specified in custom patterns, colours, shapes and finishes through the supplier. Decide the panel layout, perimeter treatment, bulkheads, reveals and transitions with the reflected ceiling plan rather than trying to conceal design changes during jointing.
| Manufacturer pattern | Panel thickness | How to use the information |
|---|---|---|
| 6/18R | 12.5 mm | Standard perforation option; confirm open area and acoustic data for the selected board. |
| 8/18R | 12.5 mm | Standard perforation option; coordinate pattern direction and panel module on shop drawings. |
| 10/23R | 12.5 mm | Standard perforation option; verify the approved substrate, backing and finish. |
| 12/25R | 12.5 mm | Standard perforation option; check how the module meets lights, grilles and perimeter trims. |
| 15/30R | 12.5 mm | Standard perforation option; obtain project-specific acoustic and fire documentation. |
| 8/12/50R | 12.5 mm | Standard perforation option; confirm the exact visual sample before manufacture. |
The pattern names identify the manufacturer’s perforation families; they are not a substitute for an approved data sheet. Samples are particularly important because hole scale, edge detail and paint colour read differently at ceiling height than on a small drawing.
Coordinate the complete ceiling before fabrication
Set the panel grid and perimeter
Lay out full panels where they will be most visible and reserve cut panels for less prominent edges. Resolve perimeter angles, shadow gaps, bulkheads and changes in ceiling level in the shop drawing. Atkar provides shop drawings for standard-range panels for sign-off before manufacture; use that review to confirm the module, pattern alignment and all openings.
Rank #2
- Great Value Pack Artist Paint Brushes: Soucolor 20 brushes in 10 sizes professional paintbrushes set — no shedding, holds paint well, cleans easily, Acrylic, watercolor, oil, gouache, Halloween pumpkin decoration & face painting, rock painting, ceramics. Fantastic high quality gifts for creative, artistic siblings to share!
- Awesome Set of Paint brushes: Professional paint brushes can cover all of your needs. The multi-purposed brushes are ideal for Watercolor, Oil, Gouache, enamel, Acrylic Painting, Body, Nail, Face Painting, Miniature, Model, Wood, Glass, Cup, Ceramic, Fine work, Art class, Craft Art Painting, DIY Art Crafts etc.
- Soft and long-lasting: The bristles are soft and strong, with nickel metal ferrules and blue wooden handles. After cleaning, the bristles will become soft and fluffy again and will not fall off.
- Easy to clean: it’s very convenient to Wash well in soap and water. Retain shape after drying. the brushes hold up very well. Nice selection to beginners and professionals. Keep them clean and they last a long time.
- Halloween Pumpkin Ceramic Crafts Supplies: A Great painting gift for family, friends, kids, girls, women, student, classmate, teacher. For using in school, travel or used in the home and office.
Reserve every service opening
Coordinate lights, air outlets, smoke detectors, sprinklers, speakers, inspection openings and curtains before the jointing stage. Openings and light recesses should be completed before forming the VoglFuge joints. Services must be independently suspended rather than loaded from the perforated boards or their framing.
Provide access without breaking the design
Use system-compatible access panels and align them with the perforation module where possible. Vogl’s catalogue treats panels, profiles, fixing materials, tools, system kits, frieze tape and access panels as parts of a complete system. A visually neat access hatch is easier to achieve when its size and position are fixed on the reflected ceiling plan.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Framing, loads and environmental conditions
The Au.diVoglFuge installation guide specifies 12.5 mm panels on suspended CD 60/27 primary and secondary profiles. Suspension-bracket centres vary with the framing configuration, so the installer should use the approved layout rather than a generic spacing rule. The same guide gives distributed-load limits of up to 0.15 or 0.30 kN/m², depending on that configuration.
| Assembly item | Published requirement or limit | Project action |
|---|---|---|
| Ceiling board | 12.5 mm Au.diBoard VoglFuge panel | Confirm the selected perforation, edge and substrate in the specification. |
| Suspension | CD 60/27 primary and secondary profiles | Use the manufacturer’s configuration-specific bracket layout. |
| Distributed load | Up to 0.15 or 0.30 kN/m², depending on framing configuration | Check the design load, including insulation and any permitted ceiling components. |
| Services | Independent support required | Suspend lights, ductwork, sprinklers and other services from the structure. |
| Mineral wool | Installed directly above the panels | Specify the thickness and acoustic classification required by the project. |
One Vogl installation document advises a minimum working temperature of +10°C and says the building site should not fall below +5°C. Keep these conditions through jointing and finishing; cold, damp or rapidly changing conditions can undermine the controlled drying on which a seamless finish depends.
Rank #3
- 【All sizes of art brushes】: The 10 sizes of multi-functional brushes have various shapes, making the mixing color easier, which is very suitable for artists, students, teenagers, children and painters at all levels. Wonderful Present ideas for friends and family who like painting!
- 【general brush set】: Professional paint brush can meet all your needs. Multifunctional brush is very suitable for watercolor, oil, gouache, acrylic painting, body, nail, face painting, miniature, model, ceramics, arts and crafts painting, etc.
- 【high quality process】: It is designed with anti falling bristles, anti-rust nickel ferrule and solid wood handle. You can use the brush to focus on the painting and always be creative.
- 【easy to maintain】: After using the brush, it is very convenient to clean the brush with warm soapy water and reshape the tip of the brush. Air dry the brush and place it on top of the top for long use.
- 【100% satisfaction guarantee - buy now】1 packs of set brushes, you can also get friendly customer service, any questions feel free to contact us, within 24 hours to help you! There is no risk in buying our paint brush kit.
How the VoglFuge installation sequence works
- Complete the suspended grid. Install and level the CD 60/27 primary and secondary profiles, verify the approved bracket arrangement and check that the grid can carry only the loads permitted by the system design.
- Install insulation and coordinate services. Place mineral wool directly above the panels where specified. Finish independent supports for lights, HVAC, sprinklers, speakers and other components before closing the ceiling.
- Fix the panels edge to edge. Set out the approved module, keep perforation lines aligned and drive panel screws so the heads sit slightly below the board surface without damaging the face.
- Complete openings and access panels. Form inspection openings, light recesses and other penetrations before joint finishing. Reinforce and support these details according to the approved system drawings.
- Install movement provisions. Form building movement and expansion joints where shown. The cited Vogl guidance advises an expansion joint after every 10 m or 100 m²; the stricter requirement should govern where conditions differ.
- Apply the proprietary joint system. Use the specified strip tape and liquid glue at panel joints. The process replaces compound filler; do not substitute a conventional filler treatment and expect the same joint performance.
- Prepare the surface. Use the system’s sanding pad, sandpaper, sponge and spatula to remove nibs and level filled screw heads without abrading perforation edges.
- Inspect before paint. Check joint lines, screw heads, perimeter details, access panels and pattern alignment under the lighting conditions the finished room will have.
Atkar’s contractor install kits include sandpaper, joint tape, liquid glue, panel screws, panel-head filler, a lambskin roller, sponge, spatula, knife and sanding pad. Kit coverage is offered for ceilings up to 15 m², 30 m² or 60 m². Kit contents do not replace the installer’s obligation to follow the approved manufacturer instructions.
Painting a perforated VoglFuge ceiling
Paint discipline determines whether the ceiling remains acoustically open and visually uniform. Atkar’s design guidance states that a faultless finish requires good installation practice, quality paint and the specified application method, with a minimum finished dry-film thickness of 75 microns.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errors- Use a suitable sealer undercoat. Seal the raw board and jointed areas with a product approved for the selected substrate and final coating system.
- Choose a light, non-gloss finish. Light colours preserve the intended architectural appearance; gloss finishes highlight surface variation and are not recommended in the cited guidance.
- Roll with a short nap. Apply paint with a short-nap roller to control coverage around the perforations and avoid flooding the holes.
- Apply three coats in total. The Au.diBoard datasheet specifies one sealer undercoat followed by two top coats.
- Allow each coat to dry fully. Follow the paint manufacturer’s drying conditions and maintain the required site temperature before recoating.
- Do not spray. Spraying can clog perforations and the acoustic backing, reducing the open area that the design relies on.
The ceiling is generally supplied raw and painted on site unless a specified coloured product is ordered. Consequently, the final colour, sheen, dry-film thickness and acoustic behaviour depend on the approved paint system and workmanship, not just the board pattern.
Will a VoglFuge ceiling crack?
The patented strip-tape-and-glue joint is promoted by Vogl and Atkar as a high-crack-resistance method. It reduces reliance on compound filler at panel joints, but it cannot cancel building movement, poor framing, inadequate drying or incorrectly placed penetrations.
Rank #4
- Bates paint brushes come in a convenient 6 pieces with 3 flat and 3 angled bristle styles, including (1”, 1.5”, 2”) flat and (1.5”, 2”, 2.5”) angled bristles, perfect for tackling any surface painting or staining job.
- The sturdy natural bristles of each brush are designed to hold more paint, creating a smoother finish with fewer streaks and saving you time on the job.
- The lightweight wooden handles provide extra comfort and ease during long painting processes like walls, trims, cabinets, and doors.
- These versatile brushes are ready-to-use, easy to clean, and can be reused multiple times, making them economical as well as reliable tools for any painting project.
- Bates paint brushes can be used for both oil-based paints as well as latex stains and are ideal for home or commercial projects such as decks, fences or DIY painting jobs.
- Control movement: incorporate the project’s building and expansion joints, including the cited 10 m or 100 m² guidance.
- Keep the grid stable: level the suspension and avoid hanging services from the board assembly.
- Protect the board edges: keep panels aligned and undamaged during fixing and sanding.
- Respect temperature limits: maintain at least +10°C during work and do not work on a site below +5°C, as advised in the installation document.
- Inspect before coating: paint cannot hide an open joint or distorted perimeter detail without making later correction more difficult.
If a crack appears, first determine whether it follows a joint, a perimeter, a service opening or a building movement line. Do not simply fill and repaint; identify and correct the movement or support problem, then use the specified VoglFuge repair method for the affected detail.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Performance, fire and environmental claims
Atkar publishes high acoustic performance, a Group 1 fire-rated option, GECA certification, fast installation and a 10-year warranty for its VoglFuge offering. These are supplier claims tied to the products and configurations covered by its documentation. They should not be generalized to every perforation, substrate, paint or jurisdiction.
Before approval, request the exact fire classification, acoustic test or calculation, environmental certificate and warranty terms for the proposed panel, backing, finish and suspension. Atkar notes that finishes and substrates can affect Group Ratings. Building-code requirements, fire services and warranty conditions may also differ by country and project type.
How VoglFuge compares with other ceiling systems
A fair comparison is about the complete assembly, not the visible panel alone. Use the following decision axes when evaluating a conventional plasterboard ceiling, a demountable acoustic tile or another perforated system.
Best Value
- 2 Inch Angled Paint Brush for Precision Cutting-In – Designed for clean, sharp lines around trim, baseboards, ceilings, corners, and detailed edge work. The perfect size for control and coverage.
- Value 3-Pack for Pros & DIY Projects – Includes three professional 2-inch angled sash brushes — ideal for contractors, remodelers, and homeowners tackling multiple rooms or repeat paint jobs.
- Smooth Results on Walls, Trim & Cabinets – Great for interior wall painting, cabinet edges, furniture projects, and trim work where a smooth finish and crisp control matter most.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
| Decision axis | Questions to ask about VoglFuge | Evidence needed before selection |
|---|---|---|
| Joint technology | Does the strip-tape-and-glue process deliver the desired seamless appearance and crack resistance? | Approved installation method and qualified installer. |
| Perforation and acoustics | Does the chosen pattern and insulation meet the room’s acoustic brief? | Data for the exact panel, backing and finish. |
| Framing and services | Can the CD 60/27 grid accommodate the ceiling geometry and independent service supports? | Coordinated reflected ceiling plan and structural load check. |
| Fire and environmental certification | Does the selected build-up retain the required Group Rating and environmental certification? | Current certificates for the specified configuration and jurisdiction. |
| Installation and drying | Are temperature control, jointing skill and multi-coat drying practical on site? | Programme, installer capability and paint-system instructions. |
| Access and perimeter details | Can access panels, lights and edges remain visually integrated? | Signed-off shop drawings and sample details. |
| Finish flexibility | Is a standard or custom pattern, colour or shape required? | Approved sample and manufacturer confirmation. |
| Supply and warranty | Can panels, profiles, kits and replacement parts be sourced locally? | Written quote, lead time, warranty and authorised installer details. |
Specifying and sourcing VoglFuge
This is a specialist, quote-led architectural product. In Australia, Atkar provides samples, technical information, specification support and quote contact routes; Vogl Ceiling Systems provides the manufacturer catalogue and regional product channels. Ask for a sample before approving the pattern or colour, and confirm whether the proposal is standard-range or custom manufacture.
- State the exact perforation profile, 12.5 mm panel thickness and edge condition.
- Identify the substrate, mineral-wool backing, suspension configuration and permitted distributed load.
- Show every light, grille, sprinkler, detector, speaker, access panel and movement joint on the reflected ceiling plan.
- Specify the sealer, two top coats, light/non-gloss colour and minimum 75-micron finished dry film.
- Request current fire, acoustic, GECA and warranty documents for the exact build-up.
- Confirm shop-drawing approval, manufacture lead time, kit coverage and installer training or experience.
Published material does not establish a universal installed price or labour rate. Obtain a project quotation that separates panels, profiles, suspension, insulation, access panels, jointing materials, painting, access equipment and service coordination.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Common failure points and practical checks
| Symptom | Likely control that was missed | Check or correction |
|---|---|---|
| Visible or uneven joint line | Panels were misaligned, the tape-and-glue process was not followed, or sanding was incomplete. | Inspect the joint before repainting; repair with the specified system materials. |
| Cracking near a perimeter or long run | Movement joint or stable perimeter detail was omitted. | Review the movement strategy and building movement before local patching. |
| Dark or blocked perforations | Paint was sprayed or applied too heavily. | Stop coating, assess whether holes and backing remain open, and follow the approved correction method. |
| Different sheen across panels | Inconsistent paint, drying or roller application. | Verify sealer, colour, roller type, dry conditions and the 75-micron minimum. |
| Sagging or displaced panels | Framing, suspension or service loads do not match the approved design. | Check CD 60/27 layout, bracket centres, load limits and independent service supports. |
| Access hatch looks out of pattern | Opening size and location were chosen after panel manufacture. | Coordinate access panels with the perforation module on shop drawings. |
Bottom line for designers and painters
Choose Au.diBoard VoglFuge when a project needs a continuous perforated gypsum ceiling rather than a visibly modular tile. Its strongest differentiator is the patented strip-tape-and-glue joint, but the promised seamless appearance depends on a coordinated CD 60/27 assembly, controlled movement, independent services, careful panel layout and disciplined three-coat painting. Select the perforation and finish from an approved sample, verify project-specific acoustic, fire and environmental documents, and appoint an installer who can follow the manufacturer’s joint and temperature requirements.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
