PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware match
ThatPainter is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
To waterproof a bathroom lawfully in Australia, you must follow the National Construction Code (NCC) provisions adopted in your state or territory, use a compliant waterproofing system, and match the detailing to the building class and shower configuration. For a house, the main references are the NCC Housing Provisions Part 10.2 and, where that compliance route applies, AS 3740. The cited shower detail requires a waterproof floor, waterproof shower walls to at least 1800 mm above the floor substrate, waterproof junctions and penetrations, and carefully detailed membrane terminations. Those dimensions apply to the specific shower arrangement described in the provision; they are not a universal instruction to coat every bathroom surface.
This is a code-compliance guide, not a substitute for the adopted NCC text, approval documents, or project-specific waterproofing documentation. Confirm the applicable edition and any state or territory variations before work begins.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
As an Amazon Associate I earn from qualifying purchases.
What “Australian Standards” means for bathroom waterproofing
Australian bathroom waterproofing is governed by two connected layers. The National Construction Code (NCC) sets the minimum performance and construction requirements adopted through state and territory legislation. Referenced standards, including AS 3740, provide design and construction requirements where the selected NCC compliance pathway calls for them.
The Australian Building Codes Board (ABCB) describes the NCC as “a performance-based code which sets the minimum required level for the safety, health, amenity, accessibility and sustainability of certain buildings.” The NCC is not adopted on one identical timetable nationwide. Each state and territory decides when an edition takes effect and may modify provisions. ABCB national guidance for houses is therefore an overview, not a jurisdiction-specific approval.
#1 Best Overall
- COMPLETE 5-PIECE BRUSH SET FOR EVERY PAINTING TASK — Includes 1 Inch Flat, 1.5 Inch Angle, 2 Inch Flat, 2 Inch Angle Stubby, and 2.5 Inch Angle brush giving you every size professional painters use daily. Get all 5 for less than the price of a single brush from hardware store brands — professional grade performance at a fraction of the cost. Perfect for walls, trim, cabinets, doors, furniture, and detailed cutting-in work on any project.
- ZERO BRISTLE LOSS — GUARANTEED BY PRECISION ADHESIVE BONDING — Every bristle is locked in place with precision-set adhesive that keeps them in the brush — not in your paint job. The coated steel ferrule provides structural support while the adhesive bond ensures clean performance on every stroke. Premium SRT synthetic filaments load more paint and release it evenly for a smooth streak-free finish on walls, ceilings, and trim. Works with latex, oil-based paint, primer, sealer, and wood stain.
- INCLUDES THE ANGLE STUBBY MOST SETS LEAVE OUT — Professional painters know the 2 Inch Angle Stubby is the go-to brush for tight cabinet interiors, window sashes, inside corners, and detailed trim where standard angle brushes are too long. Combined with the 1.5 and 2.5 inch angle sash brushes you have precision cutting-in covered at every scale — baseboards, crown molding, door casings, and ceiling lines.
- FLAT BRUSHES FOR BROAD SMOOTH COVERAGE ON ANY SURFACE — The 1 and 2 inch flat brushes deliver even coverage on walls, furniture, shelving, doors, fences, decks, and wood surfaces. Ideal for applying primers, stains, varnishes, polyurethane, and specialty coatings. Solid wood handles provide all-day comfort and control for both professional contractors and weekend DIY homeowners tackling interior or exterior painting projects.
- TRUSTED BY PROFESSIONAL PAINTERS AND CONTRACTORS NATIONWIDE — Pro Grade delivers professional-grade results at a price that makes sense for crews who go through brushes on every job. Ideal for property managers, remodeling contractors, apartment turnover crews, maintenance teams, and commercial painting operations. Backed by thousands of verified reviews from working painters. Washable and reusable for multiple projects.
Check the edition that applies to your project
The ABCB editions register reports NCC 2022 Amendment 2 as adopted from 29 July 2025, superseding Amendment 1 from that date. ABCB information says jurisdictions may consider NCC 2025 adoption from 1 May 2026, while each jurisdiction determines its own timing. NCC 2025 material identified by ABCB is preview material, so do not assume that one NCC 2025 status applies throughout Australia.
Before you specify a membrane or start demolition, ask the relevant state or territory building administration, certifier or building surveyor which NCC edition, amendments and local variations govern the approval date and site. Keep that confirmation with the project documentation.
First identify the building class and compliance route
The house provisions are not a universal rule book for every residential project. Start by identifying the building class and the compliance pathway being used.
| Project type | Primary NCC material identified in the guidance | How to use it |
|---|---|---|
| House | Volume Two, Housing Provisions Part 10.2; AS 3740 may apply depending on the selected option | Compare the adopted Housing Provisions and any applicable AS 3740 route with the actual shower, floor and threshold design. |
| Class 2 or Class 3 building | NCC Volume One, Specification 26 and AS 3740 | Use Specification 26 to identify which elements need waterproofing or water resistance, then apply the AS 3740 design and construction requirements that govern the project. |
| Class 4 part of a building | NCC Volume One, Specification 26 and AS 3740 | Do not import a house detail without checking the Volume One provisions and the approved design. |
For a house, the NCC 2022 framework restores some construction details to the Housing Provisions and also provides an AS 3740 route subject to the stated provisions. The applicable approval documents and adopted code text control if they differ from a general guide.
What the cited Housing Provisions require in a shower
Part 10.2 describes requirements by shower-area configuration. The most commonly quoted dimensions below are from the cited provision for a shower with a hob, step-down or level threshold. They must be read together with the rest of the provision and the approved design.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchRank #2
- Great Value Pack Artist Paint Brushes: Soucolor 20 brushes in 10 sizes professional paintbrushes set — no shedding, holds paint well, cleans easily, Acrylic, watercolor, oil, gouache, Halloween pumpkin decoration & face painting, rock painting, ceramics. Fantastic high quality gifts for creative, artistic siblings to share!
- Awesome Set of Paint brushes: Professional paint brushes can cover all of your needs. The multi-purposed brushes are ideal for Watercolor, Oil, Gouache, enamel, Acrylic Painting, Body, Nail, Face Painting, Miniature, Model, Wood, Glass, Cup, Ceramic, Fine work, Art class, Craft Art Painting, DIY Art Crafts etc.
- Soft and long-lasting: The bristles are soft and strong, with nickel metal ferrules and blue wooden handles. After cleaning, the bristles will become soft and fluffy again and will not fall off.
- Easy to clean: it’s very convenient to Wash well in soap and water. Retain shape after drying. the brushes hold up very well. Nice selection to beginners and professionals. Keep them clean and they last a long time.
- Halloween Pumpkin Ceramic Crafts Supplies: A Great painting gift for family, friends, kids, girls, women, student, classmate, teacher. For using in school, travel or used in the home and office.
| Element | Cited requirement for the specified shower configuration |
|---|---|
| Shower floor | Waterproof, including the hob or step-down. |
| Shower walls | Waterproof to not less than 1800 mm above the floor substrate. |
| Wall junctions and joints | Waterproof at least 40 mm on either side of the junction. |
| Wall-to-floor junction | Waterproof. |
| Penetrations in the shower area | Waterproof. |
A preformed shower base follows the stated shower requirements except that the floor requirement in clause (1)(a) does not apply to the base itself. That exception does not remove the other applicable wall, junction and penetration requirements.
Why the configuration matters
A hob, a step-down, a level threshold and a preformed base change how water is contained and where a membrane must terminate. Do not reduce the code to “waterproof every bathroom surface” or copy a detail from a different shower. The provisions distinguish waterproof and water-resistant elements and address shower areas, areas outside showers, walls beside vessels, laundries and WCs separately.
Membrane termination and threshold details
Membrane edges are part of the waterproof system. In the cited details:
- At a hob: the membrane runs over the top of the hob, down its outside face and terminates at least 50 mm onto the floor.
- At a shower waterstop: the membrane comes to the top of the finished floor.
- Under a framed shower screen: the membrane terminates at least 5 mm above the finished tile surface in the cited waterstop detail.
These are configuration-specific termination instructions. A membrane should not simply stop at a convenient tile edge, and a tile, grout line or silicone bead should not be treated as a substitute for the specified waterproof seal.
Floor-level openings in a whole-floor waterproofing detail
Where the whole wet-area floor is waterproofed, the cited detail for a floor-level opening includes a waterstop and a membrane termination that forms a waterproof seal to the waterstop and perimeter flashing. The opening, flashing, waterstop and membrane must be treated as one coordinated detail; changing one component can alter the compliance of the assembly.
Rank #3
- 【All sizes of art brushes】: The 10 sizes of multi-functional brushes have various shapes, making the mixing color easier, which is very suitable for artists, students, teenagers, children and painters at all levels. Wonderful Present ideas for friends and family who like painting!
- 【general brush set】: Professional paint brush can meet all your needs. Multifunctional brush is very suitable for watercolor, oil, gouache, acrylic painting, body, nail, face painting, miniature, model, ceramics, arts and crafts painting, etc.
- 【high quality process】: It is designed with anti falling bristles, anti-rust nickel ferrule and solid wood handle. You can use the brush to focus on the painting and always be creative.
- 【easy to maintain】: After using the brush, it is very convenient to clean the brush with warm soapy water and reshape the tip of the brush. Air dry the brush and place it on top of the top for long use.
- 【100% satisfaction guarantee - buy now】1 packs of set brushes, you can also get friendly customer service, any questions feel free to contact us, within 24 hours to help you! There is no risk in buying our paint brush kit.
Choose materials by classification and system compatibility
The cited Housing Provisions identify several materials as deemed waterproof, including:
- stainless steel;
- flexible waterproof sheet flooring with waterproof joints;
- membranes complying with AS/NZS 4858; and
- waterproof sealant.
The same provisions list separate water-resistant substrates for walls and floors. “Water-resistant” is not interchangeable with “waterproof”: the required classification depends on the element and its location.
What an AS/NZS 4858 membrane does—and does not—prove
An AS/NZS 4858-compliant membrane is a recognised waterproof material category. The product classification alone does not establish that the bathroom is compliant. Compliance also depends on the membrane system, compatible primers and sealants, substrate preparation, junction treatment, falls and drainage, penetrations, threshold detailing and installation in accordance with the product documentation and adopted code.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Do not select a generic coating merely because its label says “waterproof.” Confirm its stated classification, the substrates it accepts, compatibility with adjoining components and the manufacturer’s application instructions. A product purchase cannot by itself certify a bathroom.
A practical compliance workflow before waterproofing
- Confirm the project jurisdiction and approval date. Obtain the state or territory’s adopted NCC edition, amendments and variations for the work. Record the response from the building surveyor, certifier or relevant administration.
- Confirm the building class. Establish whether the work is in a house or in a Class 2, Class 3 or Class 4 context. Use Volume Two house provisions only where they apply.
- Identify the compliance pathway. For a house, determine whether the approved design uses the Housing Provisions, an AS 3740 pathway, or another permitted option. For larger classes, check Volume One Specification 26 and AS 3740.
- Draw the shower configuration. Mark whether the shower has a hob, step-down, level threshold or preformed base. Show the finished floor, floor substrate, screen position, waterstop, doors, penetrations and floor-level openings.
- Mark the required waterproof zones. On the drawing, identify the shower floor, the 1800 mm wall height where that cited detail applies, the 40 mm junction widths, the wall-to-floor junction and every penetration.
- Detail the membrane termination. Show the 50 mm return onto the floor at a hob, the waterstop termination and the 5 mm clearance above finished tile under a framed screen where that detail applies.
- Specify a complete system. List the membrane or sheet, primers, reinforcing components, sealants, waterstop and perimeter flashing where required. Verify that each component is compatible and covered by the relevant documentation.
- Prepare the substrate. The substrate must be suitable for the specified system and ready for the required junction, penetration and drainage details. Resolve movement, gaps, damaged surfaces and service penetrations before membrane application rather than hiding them under a coating.
- Install and document the work. Follow the selected system’s instructions and the approved detail. Photograph junctions, penetrations, waterstops and terminations before they are covered, and retain product identification and installer records.
- Have the work checked at the required stage. Arrange the inspection or certification required by the approval and local process before tiling conceals the membrane. Rectify any departure while the work remains accessible.
How to read the key dimensions on site
The dimensions are measured from particular reference points, so a tape measure alone is not enough unless the reference surface is clear.
Rank #4
- Bates paint brushes come in a convenient 6 pieces with 3 flat and 3 angled bristle styles, including (1”, 1.5”, 2”) flat and (1.5”, 2”, 2.5”) angled bristles, perfect for tackling any surface painting or staining job.
- The sturdy natural bristles of each brush are designed to hold more paint, creating a smoother finish with fewer streaks and saving you time on the job.
- The lightweight wooden handles provide extra comfort and ease during long painting processes like walls, trims, cabinets, and doors.
- These versatile brushes are ready-to-use, easy to clean, and can be reused multiple times, making them economical as well as reliable tools for any painting project.
- Bates paint brushes can be used for both oil-based paints as well as latex stains and are ideal for home or commercial projects such as decks, fences or DIY painting jobs.
1800 mm wall height
The cited requirement is at least 1800 mm above the floor substrate in the specified shower configuration. The reference is not automatically the top of the finished tile, the top of a hob or the visible shower screen. Mark the substrate datum on the approved detail before the wall lining and tile build-up are installed.
40 mm either side of a junction
The cited shower provision requires wall junctions and joints to be waterproof at least 40 mm on either side of the junction. This concerns the waterproofed zone around the junction, not a 40 mm bead of sealant applied after tiling.
50 mm at a hob
At the cited hob detail, the membrane passes over the top, down the outside face and terminates at least 50 mm onto the floor. Verify which side is the outside face on the construction drawing and keep the membrane continuous through the change in level.
5 mm beneath a framed screen
In the cited waterstop detail, the membrane terminates at least 5 mm above the finished tile surface beneath a framed shower screen. This small clearance is tied to that screen and waterstop arrangement; it should not be copied to an unrelated threshold.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Common mistakes that create compliance risk
- Using the wrong code class: applying a house detail to a Class 2, 3 or 4 project without checking Volume One Specification 26 and AS 3740.
- Assuming one national adoption date: treating NCC 2022 Amendment 2 or NCC 2025 information as automatically applicable in every jurisdiction.
- Waterproofing only the visible shower wall: omitting the floor, wall-to-floor junction, wall junction widths or penetrations required by the selected detail.
- Stopping the membrane at the tile edge: ignoring the hob, waterstop or floor-level opening termination shown in the provision.
- Confusing water-resistant with waterproof: selecting a substrate classification that does not match the element’s location.
- Treating a membrane certificate as a completed bathroom certificate: overlooking substrate preparation, compatible components, junctions, drainage and installation quality.
- Changing the shower layout late: moving a screen, door, hob, drain or penetration after the waterproofing detail has been approved.
- Covering the work before inspection: tiling before the required inspection or photographic record makes defects harder to verify and repair.
- Relying on sealant as the primary barrier: a surface bead cannot replace a continuous membrane, sheet joint, waterstop or properly detailed penetration.
When a bathroom is outside the cited shower example
The 1800 mm, 40 mm, 50 mm and 5 mm figures belong to the cited Part 10.2 shower arrangements. A bathroom with a different threshold, a preformed base, a wet-room floor, a vessel beside a wall, a laundry zone or a WC may be governed by different provisions. The Housing Provisions distinguish those locations rather than prescribing one blanket waterproofing envelope.
Best Value
- 2 Inch Angled Paint Brush for Precision Cutting-In – Designed for clean, sharp lines around trim, baseboards, ceilings, corners, and detailed edge work. The perfect size for control and coverage.
- Value 3-Pack for Pros & DIY Projects – Includes three professional 2-inch angled sash brushes — ideal for contractors, remodelers, and homeowners tackling multiple rooms or repeat paint jobs.
- Smooth Results on Walls, Trim & Cabinets – Great for interior wall painting, cabinet edges, furniture projects, and trim work where a smooth finish and crisp control matter most.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
If the design changes from a hob to a level entry, from a framed screen to an open shower or from a local shower floor to a whole wet-area floor, have the waterproofing drawing rechecked. The change can affect membrane extent, waterstop placement, floor-level openings and the applicable compliance pathway.
Free tools Windows power users keep installed
One-click scans. No signup required.
What to give your waterproofing contractor and certifier
A clear package prevents the installer from having to infer the code detail. Provide:
- the building class and project address;
- the state or territory and the confirmed adopted NCC edition;
- the approved bathroom plan and sections;
- the shower configuration and finished floor levels;
- locations of hobs, step-downs, screens, doors, drains, waterstops and floor-level openings;
- the selected compliance pathway and any referenced AS 3740 requirements;
- the membrane and accessory documentation, including AS/NZS 4858 classification where claimed; and
- the inspection, photographic and certification requirements for the project.
Ask the installer to identify every penetration and junction before application, not after tiling. Ask the certifier or building surveyor to confirm the inspection stage and the records required for the approval.
House projects versus larger residential buildings
For a detached house, the ABCB guide directs readers to NCC Volume Two, Housing Provisions Part 10.2 and the relevant AS 3740 option. For Class 2 and Class 3 buildings and Class 4 parts, NCC Volume One requires building elements to be waterproof or water resistant in the locations listed in Specification 26 and to comply with AS 3740. Specification 26 establishes which elements need which level of protection; AS 3740 supplies the design and construction requirements.
That distinction matters for apartments, boarding or accommodation buildings and Class 4 parts. A detail that appears adequate for a house shower does not independently resolve the Volume One requirements, fire or service interfaces, or the approved documentation for a larger building.
Final pre-tiling checklist
- The adopted NCC edition and jurisdictional variations are recorded.
- The building class and compliance route are confirmed.
- The shower threshold type is shown on the drawing.
- The waterproof floor and wall extents are marked for that configuration.
- Wall junctions, wall-to-floor junctions and penetrations are detailed.
- Hob, waterstop, framed-screen and floor-opening terminations match the selected detail.
- The membrane and accessories have the required classification and documented compatibility.
- Substrate preparation, drainage and service penetrations have been checked.
- Inspection and photographic records are complete before the membrane is concealed.
Australian bathroom waterproofing is therefore a coordinated code, design and installation task. Confirm the local NCC adoption first, then make the shower configuration, membrane system and threshold details agree with the approved documents before any tile is laid.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
