Recommended Free Tools
PC Slower Than It Used to Be?
Free scan · Windows 10 & 11
Crashes, No Sound, or Screen Glitches?
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Free scan · under a minute
Windows Errors? Fix Them Before They Spread
Free scan · no reinstall
ThatPainter is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
AxiLume Clearview Modular Fully Framed is Axiom Group’s project-specified glass balustrade range for balconies and decks. Axiom describes the Vista suite as a pre-glazed, powder-coated and assembled system that clips together and bolts down. The range includes different handrail treatments, including rectangular and oval profiles, plus a listed variation with an 88 mm-wide elliptical louvre blade.
As an Amazon Associate I earn from qualifying purchases.
Those descriptions identify the product concept, not an approval for every site. Current dimensions, glass build-up, loads, fixings, substrate, certification and installation details must be confirmed against the project’s engineering documents and the latest Axiom documentation before ordering or installing.
What the AxiLume Clearview system is
Clearview is a fully framed glass balustrade: the glazing sits within a framed assembly rather than being held only by isolated point fittings or a minimal shoe. Axiom lists Clearview Fully Framed as a balustrade-system category and identifies the AxiLume Clearview Modular Fully Framed range in its product-release material.
#1 Best Overall
- COMPLETE 5-PIECE BRUSH SET FOR EVERY PAINTING TASK — Includes 1 Inch Flat, 1.5 Inch Angle, 2 Inch Flat, 2 Inch Angle Stubby, and 2.5 Inch Angle brush giving you every size professional painters use daily. Get all 5 for less than the price of a single brush from hardware store brands — professional grade performance at a fraction of the cost. Perfect for walls, trim, cabinets, doors, furniture, and detailed cutting-in work on any project.
- ZERO BRISTLE LOSS — GUARANTEED BY PRECISION ADHESIVE BONDING — Every bristle is locked in place with precision-set adhesive that keeps them in the brush — not in your paint job. The coated steel ferrule provides structural support while the adhesive bond ensures clean performance on every stroke. Premium SRT synthetic filaments load more paint and release it evenly for a smooth streak-free finish on walls, ceilings, and trim. Works with latex, oil-based paint, primer, sealer, and wood stain.
- INCLUDES THE ANGLE STUBBY MOST SETS LEAVE OUT — Professional painters know the 2 Inch Angle Stubby is the go-to brush for tight cabinet interiors, window sashes, inside corners, and detailed trim where standard angle brushes are too long. Combined with the 1.5 and 2.5 inch angle sash brushes you have precision cutting-in covered at every scale — baseboards, crown molding, door casings, and ceiling lines.
- FLAT BRUSHES FOR BROAD SMOOTH COVERAGE ON ANY SURFACE — The 1 and 2 inch flat brushes deliver even coverage on walls, furniture, shelving, doors, fences, decks, and wood surfaces. Ideal for applying primers, stains, varnishes, polyurethane, and specialty coatings. Solid wood handles provide all-day comfort and control for both professional contractors and weekend DIY homeowners tackling interior or exterior painting projects.
- TRUSTED BY PROFESSIONAL PAINTERS AND CONTRACTORS NATIONWIDE — Pro Grade delivers professional-grade results at a price that makes sense for crews who go through brushes on every job. Ideal for property managers, remodeling contractors, apartment turnover crews, maintenance teams, and commercial painting operations. Backed by thousands of verified reviews from working painters. Washable and reusable for multiple projects.
The manufacturer’s Vista description is unusually specific about the supplied condition. It calls the product a “pre-glazed, powder coated, and assembled balustrade system that clips together and bolts down.” That wording indicates a modular, largely prepared system in which the installer connects supplied sections and secures them to the supporting structure. It does not establish a guaranteed installation duration, a particular crew size or a labour saving; those outcomes depend on access, geometry, substrate and the approved fixing design.
What “modular” means in practice
Modular construction normally requires the balustrade to be coordinated as a series of posts, rails, corners and glazed bays rather than as one continuous custom fabrication. The exact module lengths, joints and tolerances are not stated in the available public material. The architect, supplier and engineer therefore need to agree the setting-out drawings before fabrication.
Vista suite options
| Listed variation | What the manufacturer identifies | What still needs project confirmation |
|---|---|---|
| Rectangular handrail | Vista version using a rectangular handrail profile. | Profile dimensions, finish, joints, end details, returns and fixing method. |
| Oval handrail | Vista version using an oval handrail profile. | Profile dimensions, finish, joints, end details, returns and fixing method. |
| Elliptical louvre blade | A listed suite variation incorporating an 88 mm-wide elliptical louvre blade. | Blade spacing, orientation, privacy or screening performance, wind design and connection details. |
The 88 mm figure describes the listed blade width; it is not a complete louvre specification. Do not infer spacing, airflow, shading, acoustic performance or structural capacity from that single dimension.
How the supplied system is intended to connect
Factory-prepared condition
Axiom’s description says the Vista system is pre-glazed, powder-coated and assembled. “Pre-glazed” means the glass is described as installed in the supplied frame before site connection. “Powder-coated” identifies the stated finish process, but the coating class, colour reference, film thickness and environmental warranty are not provided in the reviewed material. “Assembled” does not remove the need for site checks, final fixing, alignment and inspection.
Rank #2
- Great Value Pack Artist Paint Brushes: Soucolor 20 brushes in 10 sizes professional paintbrushes set — no shedding, holds paint well, cleans easily, Acrylic, watercolor, oil, gouache, Halloween pumpkin decoration & face painting, rock painting, ceramics. Fantastic high quality gifts for creative, artistic siblings to share!
- Awesome Set of Paint brushes: Professional paint brushes can cover all of your needs. The multi-purposed brushes are ideal for Watercolor, Oil, Gouache, enamel, Acrylic Painting, Body, Nail, Face Painting, Miniature, Model, Wood, Glass, Cup, Ceramic, Fine work, Art class, Craft Art Painting, DIY Art Crafts etc.
- Soft and long-lasting: The bristles are soft and strong, with nickel metal ferrules and blue wooden handles. After cleaning, the bristles will become soft and fluffy again and will not fall off.
- Easy to clean: it’s very convenient to Wash well in soap and water. Retain shape after drying. the brushes hold up very well. Nice selection to beginners and professionals. Keep them clean and they last a long time.
- Halloween Pumpkin Ceramic Crafts Supplies: A Great painting gift for family, friends, kids, girls, women, student, classmate, teacher. For using in school, travel or used in the home and office.
Clip-together and bolt-down installation
Axiom’s release material describes a clip-together installation method, while the Vista page says the system clips together and bolts down. A project-specific installation should be planned around the following sequence, subject to the approved shop drawings and engineer’s instructions:
- Confirm the approved set-out. Check bay lengths, corners, level changes, openings, handrail returns and interfaces with waterproofing, tiles, membranes and drainage. The available material does not provide standard module dimensions.
- Verify the supporting structure. Establish the substrate type, edge distances, reinforcement and allowable fixing locations. A baseplate or other fixing detail must be selected from current engineering documentation, not assumed from a typical detail.
- Protect completed surfaces. Identify areas where concealed products or products contacting a screed or tile bed could be exposed to moisture. The drawing evidence specifically calls for corrosion protection in these conditions.
- Place and align the framed sections. Connect the supplied modules using the specified clip arrangement. Check plumb, level, bay alignment and corner geometry before final tightening.
- Install approved bolts and fixings. Bolt down only with the fasteners, anchors, torque requirements and substrate details stated by the current engineer or manufacturer. Generic fasteners cannot be assumed compatible.
- Check glass retention. Confirm that blocking and frame engagement prevent the glass from dislodging. The historical drawing note says the glass should be blocked so it cannot dislodge from the frame.
- Complete handrails, caps and interfaces. Fit the specified handrail, under-cap, corners, end closures and adjoining construction details, then inspect the finished assembly against the approved drawings.
This is a coordination outline, not a substitute for Axiom’s current installation instructions or the project engineer’s method statement.
Free tools Windows power users keep installed
One-click scans. No signup required.
Components identified in the drawing evidence
A Vista SD5-02 drawing search result identifies several system-specific parts. The drawing is dated 24 November 2015, so it is historical component evidence rather than proof of the current catalogue or a current installation detail.
| Reference | Component identified | Specification implication |
|---|---|---|
| AXFLCS | Post | Coordinate post location, bay widths, corners and fixing points with the current layout. |
| BPDPMP | Baseplate | Confirm the current baseplate geometry, anchor pattern, substrate and corrosion treatment. |
| AXOHCS | Oval handrail | Use only where the approved Vista variation calls for this profile. |
| AXUCCS | Handrail under-cap | Confirm compatibility with the selected handrail and frame assembly. |
| AXBRCS | Bottom rail | Check its relationship to glass blocking, drainage, finishes and cleaning access. |
| AXCPS | Corner post | Coordinate corner angles, returns and adjoining handrail joints. |
The same drawing result references 6 mm toughened glass and AS 1288. Because the document is from 2015, the glass thickness, treatment, support conditions and standard edition must be rechecked against the current design. A reference to 6 mm toughened glass is not permission to substitute that make-up on a new project.
Rank #3
- 【All sizes of art brushes】: The 10 sizes of multi-functional brushes have various shapes, making the mixing color easier, which is very suitable for artists, students, teenagers, children and painters at all levels. Wonderful Present ideas for friends and family who like painting!
- 【general brush set】: Professional paint brush can meet all your needs. Multifunctional brush is very suitable for watercolor, oil, gouache, acrylic painting, body, nail, face painting, miniature, model, ceramics, arts and crafts painting, etc.
- 【high quality process】: It is designed with anti falling bristles, anti-rust nickel ferrule and solid wood handle. You can use the brush to focus on the painting and always be creative.
- 【easy to maintain】: After using the brush, it is very convenient to clean the brush with warm soapy water and reshape the tip of the brush. Air dry the brush and place it on top of the top for long use.
- 【100% satisfaction guarantee - buy now】1 packs of set brushes, you can also get friendly customer service, any questions feel free to contact us, within 24 hours to help you! There is no risk in buying our paint brush kit.
Glass retention, corrosion and material interfaces
Retaining the glazing
The drawing note that glass must be blocked so it cannot dislodge is a critical installation requirement. Blocking details should appear in the current shop drawings or installation instructions, including the material, location, tolerances and inspection method. The installer should not improvise packing or remove blocking to make a misaligned pane fit.
Separating dissimilar metals
The drawing evidence says dissimilar metals must be separated. The required isolator, coating, gasket or other separation method is not specified in the public material. Ask the supplier and engineer to identify every metal-to-metal interface, including posts, baseplates, bolts, rails, caps and adjacent building components.
Protecting concealed and wet-zone products
Products concealed in construction or contacting a screed or tile bed require corrosion protection according to the drawing notes. Coordinate the balustrade with waterproofing, falls, sealants and finished floor levels before the deck or balcony is closed up. A powder-coated visible surface does not by itself establish the protection of concealed fixings or cut edges.
Certification and structural approval
The Vista page says the system is certified, and Axiom’s current page describes customised certification and references Australian Standards Code AS 1170.1. These are manufacturer statements about the product range and its certification approach. They do not establish that a particular assembly, fixing, height, wind exposure, substrate or site condition is approved.
Rank #4
- Bates paint brushes come in a convenient 6 pieces with 3 flat and 3 angled bristle styles, including (1”, 1.5”, 2”) flat and (1.5”, 2”, 2.5”) angled bristles, perfect for tackling any surface painting or staining job.
- The sturdy natural bristles of each brush are designed to hold more paint, creating a smoother finish with fewer streaks and saving you time on the job.
- The lightweight wooden handles provide extra comfort and ease during long painting processes like walls, trims, cabinets, and doors.
- These versatile brushes are ready-to-use, easy to clean, and can be reused multiple times, making them economical as well as reliable tools for any painting project.
- Bates paint brushes can be used for both oil-based paints as well as latex stains and are ideal for home or commercial projects such as decks, fences or DIY painting jobs.
For each project, obtain and retain:
- the current certificate or certificates covering the proposed configuration;
- engineering calculations for imposed actions, wind and any other applicable loads;
- the specified glass make-up and safety-glazing requirements;
- post, baseplate, anchor and substrate details;
- allowable dimensions, spans, heights and corner arrangements;
- the applicable editions of AS 1288, AS 1170.1 and any other project or jurisdictional requirements; and
- an installation and inspection procedure issued or accepted by the responsible engineer.
Building approval remains a project responsibility. The supplier’s certification should be read together with the engineer’s design, the building surveyor or certifier’s requirements and the rules applying at the site’s location.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Design decisions architects should settle early
Visual character
A fully framed system gives the glass a more defined perimeter than a frameless or semi-frameless arrangement. Select the rectangular or oval handrail according to the intended line, touch profile and junction treatment. If the louvre-blade variation is being considered, resolve whether it is a visual screen, a privacy element or simply a design feature; the available description does not establish performance for any of those functions.
Free tools Windows power users keep installed
One-click scans. No signup required.
Geometry and interfaces
Document every straight run, corner, return, stair transition, level change and termination. Show how the balustrade meets walls, fascias, waterproofing, pavers, tiles and drainage outlets. Modular sections can simplify coordination only when the setting-out tolerances are known before fabrication.
Substrate and edge conditions
Record whether each fixing lands in concrete, steel, timber or another approved support, and identify slab edges, reinforcement and services. A baseplate appearance alone cannot prove that the underlying structure can resist the design actions.
Best Value
- 2 Inch Angled Paint Brush for Precision Cutting-In – Designed for clean, sharp lines around trim, baseboards, ceilings, corners, and detailed edge work. The perfect size for control and coverage.
- Value 3-Pack for Pros & DIY Projects – Includes three professional 2-inch angled sash brushes — ideal for contractors, remodelers, and homeowners tackling multiple rooms or repeat paint jobs.
- Smooth Results on Walls, Trim & Cabinets – Great for interior wall painting, cabinet edges, furniture projects, and trim work where a smooth finish and crisp control matter most.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
Finish and exposure
Specify the powder-coat colour and environmental requirements in the project schedule, then ask for the current coating specification and maintenance instructions. Coastal, industrial, high-moisture or chemically exposed locations may require particular protection; no universal exposure rating is stated in the available material.
How Clearview compares with other balustrade approaches
A fair comparison should use the same design brief and the same structural conditions. The following axes are useful when comparing Clearview with semi-frameless, frameless or other framed systems:
Recommended Free Tools
| Comparison axis | Question for Clearview | Why it matters |
|---|---|---|
| Appearance | How does the fully framed perimeter and selected handrail suit the elevation? | Frames, rails and corners affect sightlines, shadow lines and junction detailing. |
| Supply condition | Are the required bays supplied pre-glazed and assembled, and what is connected on site? | Site handling, access, storage and inspection depend on the actual delivery condition. |
| Configuration | Which handrail, glass and louvre options are available for the project? | Options change visual design and may change engineering or coordination requirements. |
| Certification | What current certificate covers this exact height, span, glass and fixing arrangement? | Range-level statements are not a project approval. |
| Substrate and fixing | What anchors, edge distances, isolators and substrate capacities are required? | Fixing design often determines feasibility before the visible system is chosen. |
| Programme and cost | What are the quoted price, lead time, delivery limits and installation scope? | No public price or lead-time figure is established for Clearview. |
| Maintenance | What cleaning, inspection, coating and replacement procedures apply? | Lifecycle effort depends on the finish, exposure and access to components. |
Documentation and procurement workflow
- Issue the design intent. Provide plans, elevations, sections, levels, finishes, handrail choice and any louvre requirement.
- Request current technical information. Ask Axiom or its specialist supplier for CAD files, current component drawings, certificates, engineering limits and installation instructions. Axiom states that CAD files are available on request.
- Complete the engineering review. Have the responsible engineer verify loads, glass, posts, baseplates, anchors, substrate and edge distances for the actual site.
- Coordinate adjacent trades. Resolve waterproofing, screeds, tiles, membranes, drainage, façade interfaces and access for lifting or handling.
- Approve shop drawings. Check every module, corner, termination, joint, handrail return and fixing before fabrication.
- Confirm the commercial scope. Obtain written pricing, delivery timing, finish, packaging, replacement policy and installation responsibilities. These values are not stated in the public information.
- Record installation evidence. Keep delivery checks, substrate records, fixing inspections, glass-blocking checks, torque records where specified and final sign-off.
Site quality checklist
- Current drawings and certificates are available at the workface.
- Delivered components match the approved schedule and are free from transport damage.
- Post and baseplate locations match the set-out.
- Substrate, reinforcement and edge distances have been checked before drilling.
- Specified corrosion protection and separation of dissimilar metals are installed.
- Glass is undamaged, correctly seated and blocked against dislodgement.
- Clips, bolts, handrails, under-caps, bottom rails and corner posts are installed as detailed.
- Finished levels, plumb, alignment, returns and clearances are recorded.
- Waterproofing and adjacent finishes remain intact.
- Any deviation is referred to the engineer before concealment or handover.
What is not established by the available public information
| Item | Status |
|---|---|
| Project-specific load capacity | Not stated; calculate and certify for the actual assembly and site. |
| Standard bay dimensions or maximum spans | Not stated; obtain current system drawings. |
| Approved fixing type and substrate | Not stated; engineer and supplier must nominate them. |
| Current glass make-up | A 2015 drawing result references 6 mm toughened glass; verify the current design. |
| Price and lead time | Not stated; request a project quotation. |
| Universal compliance for every Australian site | Not established; certification and code compliance are configuration- and project-dependent. |
Maintenance and long-term ownership
Ask for the current care instructions before handover. Establish how often exposed surfaces, glass channels, handrails, joints and drainage paths should be inspected and cleaned, and which products are permitted on the powder-coated finish, glass and seals. Do not assume that a general cleaner, replacement fastener or third-party handrail is compatible. Replacement glass and components should be ordered by the system reference and approved configuration, with the engineer consulted where a component affects retention or structural behaviour.
Questions to put to Axiom or the specialist supplier
- Which current Clearview/Vista drawing and certificate cover this exact layout?
- What glass type, thickness, treatment and edge details are approved?
- What are the allowable heights, spans, corner conditions and handrail configurations?
- Which baseplate, anchor and isolator details apply to the proposed substrate?
- How must glass blocking and retention be installed and inspected?
- What corrosion protection is required for concealed or wet-zone components?
- What CAD files, shop-drawing templates and installation instructions are current?
- What delivery condition, handling method, warranty, price and lead time are quoted for this project?
Clearview is best treated as a coordinated architectural system rather than an off-the-shelf railing kit. Its pre-glazed, clip-together and bolt-down description can simplify design coordination, while the fully framed appearance and Vista handrail or louvre choices support a defined architectural language. Final acceptance depends on current project documentation, engineering and installation inspection—not on the range description alone.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
