What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
ThatPainter is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
As an Amazon Associate I earn from qualifying purchases.
Dulux Concrete & Paving works best as a three-stage DIY system: clean the existing surface, use the primer intended for that surface, then apply a suitable decorative or protective finish. The correct route depends first on whether the concrete is bare or sealed, and whether the existing coating is sound, peeling or flaking. Before buying anything, check the surface condition and gradient in Dulux Australia’s project planner. Dulux says its Concrete & Paving products must not be used on slopes greater than 1:8 (7°) because of slip risk. A steeper area needs specialist advice rather than a different coating.
Free tools Windows power users keep installed
One-click scans. No signup required.
The range is intended for exterior areas such as driveways, garage floors, paths, patios and steps. Dulux describes the products as water-based, tintable to Dulux colours and, for relevant products, slip resistant and durable. Those are manufacturer descriptions, not independent comparative test results. Current labels, product data sheets, safety data sheets and local stockist information should decide the exact products and application method for your project.
#1 Best Overall
- COMPLETE 5-PIECE BRUSH SET FOR EVERY PAINTING TASK — Includes 1 Inch Flat, 1.5 Inch Angle, 2 Inch Flat, 2 Inch Angle Stubby, and 2.5 Inch Angle brush giving you every size professional painters use daily. Get all 5 for less than the price of a single brush from hardware store brands — professional grade performance at a fraction of the cost. Perfect for walls, trim, cabinets, doors, furniture, and detailed cutting-in work on any project.
- ZERO BRISTLE LOSS — GUARANTEED BY PRECISION ADHESIVE BONDING — Every bristle is locked in place with precision-set adhesive that keeps them in the brush — not in your paint job. The coated steel ferrule provides structural support while the adhesive bond ensures clean performance on every stroke. Premium SRT synthetic filaments load more paint and release it evenly for a smooth streak-free finish on walls, ceilings, and trim. Works with latex, oil-based paint, primer, sealer, and wood stain.
- INCLUDES THE ANGLE STUBBY MOST SETS LEAVE OUT — Professional painters know the 2 Inch Angle Stubby is the go-to brush for tight cabinet interiors, window sashes, inside corners, and detailed trim where standard angle brushes are too long. Combined with the 1.5 and 2.5 inch angle sash brushes you have precision cutting-in covered at every scale — baseboards, crown molding, door casings, and ceiling lines.
- FLAT BRUSHES FOR BROAD SMOOTH COVERAGE ON ANY SURFACE — The 1 and 2 inch flat brushes deliver even coverage on walls, furniture, shelving, doors, fences, decks, and wood surfaces. Ideal for applying primers, stains, varnishes, polyurethane, and specialty coatings. Solid wood handles provide all-day comfort and control for both professional contractors and weekend DIY homeowners tackling interior or exterior painting projects.
- TRUSTED BY PROFESSIONAL PAINTERS AND CONTRACTORS NATIONWIDE — Pro Grade delivers professional-grade results at a price that makes sense for crews who go through brushes on every job. Ideal for property managers, remodeling contractors, apartment turnover crews, maintenance teams, and commercial painting operations. Backed by thousands of verified reviews from working painters. Washable and reusable for multiple projects.
What Dulux Concrete & Paving is designed to do
Concrete & Paving is a coordinated coating range rather than one universal paint. Dulux separates it into preparation and finishing stages so the coating can bond to the actual substrate. The range is aimed at rejuvenating and protecting hard exterior surfaces that are structurally sound, including concrete driveways, garage floors, paths, patios and steps.
That distinction matters because a coating cannot repair movement, major cracking, rising damp or a failing old film. The planner asks you to identify both the material and its condition, including whether it is bare, coated, peeling or flaking. Treat that diagnosis as the first job, not as an optional colour-selection exercise.
The three stages
| Stage | Purpose | What determines the product |
|---|---|---|
| Stage 1: Clean | Remove dirt, oil, grease and other contamination so the next layer can contact the substrate. | Whether the surface is bare concrete or sealed/previously coated, and how contaminated it is. |
| Stage 2: Prime | Prepare the cleaned surface for the chosen topcoat and promote adhesion. | The substrate type and the existing coating system; Dulux lists separate preparation products for bare and sealed surfaces. |
| Stage 3: Finish | Provide the visible colour, decorative texture, traction or clear protection. | Desired appearance, traffic and slip context, and whether you want to hide or retain the natural look. |
Do not assume that a product listed in the range is suitable for every substrate. Match each product to the directions for the surface you actually have.
Identify the surface before you plan the finish
Bare concrete
Bare concrete has no intact sealer or paint film between the slab and the new coating. It still needs cleaning: curing residues, dust, laitance, oil and embedded grime can prevent adhesion. Dulux provides bare-concrete cleaning/etching and priming products for this route. Use the current label and data sheet to establish the required dilution, dwell time, rinsing and drying conditions; those details are product-specific.
Rank #2
- Great Value Pack Artist Paint Brushes: Soucolor 20 brushes in 10 sizes professional paintbrushes set — no shedding, holds paint well, cleans easily, Acrylic, watercolor, oil, gouache, Halloween pumpkin decoration & face painting, rock painting, ceramics. Fantastic high quality gifts for creative, artistic siblings to share!
- Awesome Set of Paint brushes: Professional paint brushes can cover all of your needs. The multi-purposed brushes are ideal for Watercolor, Oil, Gouache, enamel, Acrylic Painting, Body, Nail, Face Painting, Miniature, Model, Wood, Glass, Cup, Ceramic, Fine work, Art class, Craft Art Painting, DIY Art Crafts etc.
- Soft and long-lasting: The bristles are soft and strong, with nickel metal ferrules and blue wooden handles. After cleaning, the bristles will become soft and fluffy again and will not fall off.
- Easy to clean: it’s very convenient to Wash well in soap and water. Retain shape after drying. the brushes hold up very well. Nice selection to beginners and professionals. Keep them clean and they last a long time.
- Halloween Pumpkin Ceramic Crafts Supplies: A Great painting gift for family, friends, kids, girls, women, student, classmate, teacher. For using in school, travel or used in the home and office.
Sealed or previously coated concrete
A sealed surface requires a different preparation path because the existing film is the immediate bonding surface. Dulux’s sealed-surface cleaner is described as the first preparation stage and is formulated to remove stubborn oil and grease. The product page identifies uses that include sealed surfaces and pebble, stone, brick and previously sealed surfaces. It directs users to sweep and pressure-wash the area, then wait until pooled water has disappeared before proceeding. Follow the current label for the complete process and confirm that the existing coating is sound.
Peeling, flaking or doubtful areas
Loose paint or sealer is a failure layer. Coating over it can produce fresh peeling even when the new product is applied correctly. Remove all unsound material and reassess the exposed substrate. If the remaining film is inconsistent, heavily contaminated or unknown, pause and obtain advice from a coating professional or Dulux before choosing a primer. The planner’s condition categories are useful because “sealed” alone does not mean “ready to coat.”
Preparation is part of the coating system
Most exterior coating failures begin before the first topcoat. Oil, dust, chalking, moisture and incompatible old films can defeat an otherwise suitable finish. Work through cleaning and priming as separate decisions rather than substituting a quick hose-down for the specified preparation.
Cleaning workflow for a sealed surface
- Sweep away loose dirt, leaves and aggregate.
- Use the sealed-surface cleaner in the manner stated on its current label, concentrating on oil and grease contamination.
- Pressure-wash the area as directed, protecting adjacent walls, doors, drains and landscaping from contaminated runoff.
- Inspect for remaining glossy patches, loose film, stains or edges that lift. Rework or remove those areas rather than covering them.
- Wait until pooled water has gone and the substrate meets the product’s stated dryness requirements. Do not use visual surface dryness as a substitute for the label’s conditions.
The cleaner page specifically calls out pressure washing and clearing pooled water; the label and product data sheet remain the authority for the full procedure.
Rank #3
- 【All sizes of art brushes】: The 10 sizes of multi-functional brushes have various shapes, making the mixing color easier, which is very suitable for artists, students, teenagers, children and painters at all levels. Wonderful Present ideas for friends and family who like painting!
- 【general brush set】: Professional paint brush can meet all your needs. Multifunctional brush is very suitable for watercolor, oil, gouache, acrylic painting, body, nail, face painting, miniature, model, ceramics, arts and crafts painting, etc.
- 【high quality process】: It is designed with anti falling bristles, anti-rust nickel ferrule and solid wood handle. You can use the brush to focus on the painting and always be creative.
- 【easy to maintain】: After using the brush, it is very convenient to clean the brush with warm soapy water and reshape the tip of the brush. Air dry the brush and place it on top of the top for long use.
- 【100% satisfaction guarantee - buy now】1 packs of set brushes, you can also get friendly customer service, any questions feel free to contact us, within 24 hours to help you! There is no risk in buying our paint brush kit.
Cleaning and preparing bare concrete
Use the bare-concrete cleaner or etch product specified for the system. Remove all residue after treatment and allow the slab to dry as directed. Etching is not a cure for oil contamination, structural defects or a damp slab. If water continues to appear, investigate the moisture source before priming.
Why the primer must match
Dulux separates primers for bare and sealed surfaces because the two substrates present different adhesion conditions. A bare slab may need a primer that keys into mineral concrete; a sealed slab may need one compatible with the existing film. Applying the wrong primer, or skipping it because the surface looks clean, removes a designed layer from the system. Check the exact product name, permitted substrates, coverage, recoat window and weather limits on the current technical information.
Choose the finish by appearance and use
Once preparation is settled, select the finish that matches the visual result and the way people will use the area. The range includes coloured sealers, a decorative aggregate-look coating, a higher-traction option and a clear protective sealer.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstall| Finish in the Dulux range | Best fit to consider | Important qualification |
|---|---|---|
| Coloured sealer, matt | A solid, low-sheen colour for a coordinated driveway, path, patio or garage floor. | Dulux describes the coloured sealer as tintable and slip resistant. Confirm the selected colour and current substrate directions. |
| Coloured sealer, satin | A coloured finish with more sheen than matt where that appearance suits the setting. | Sheen changes how texture, marks and light are seen; it does not remove the slope restriction. |
| Crushed Pebble Effect | A decorative, textured appearance when a plain block colour is not the desired result. | The range lists a dedicated roller unit for this effect. Use the specified tool and application method rather than an ordinary roller by assumption. |
| Super Grip | Areas where Dulux positions higher slip resistance and heavier traffic as key considerations. | “Super Grip” positioning is Dulux’s guidance. It is not permission to coat a gradient over 1:8 or 7°. |
| Clear protective sealer | Projects intended to retain more of the underlying natural appearance while adding a protective clear layer. | Check that the existing surface and its colour variation are acceptable before choosing a clear finish. |
Colour and tinting
Dulux says the water-based topcoats can be tinted to a wide range of Dulux colours and provides colour tools and examples on its range material. Confirm the tinting service, available bases and lead time with a stockist before committing to a large area. Test the chosen colour in the actual light and beside adjoining walls or paving; a small sample can reveal how the concrete’s texture changes the appearance.
Rank #4
- Bates paint brushes come in a convenient 6 pieces with 3 flat and 3 angled bristle styles, including (1”, 1.5”, 2”) flat and (1.5”, 2”, 2.5”) angled bristles, perfect for tackling any surface painting or staining job.
- The sturdy natural bristles of each brush are designed to hold more paint, creating a smoother finish with fewer streaks and saving you time on the job.
- The lightweight wooden handles provide extra comfort and ease during long painting processes like walls, trims, cabinets, and doors.
- These versatile brushes are ready-to-use, easy to clean, and can be reused multiple times, making them economical as well as reliable tools for any painting project.
- Bates paint brushes can be used for both oil-based paints as well as latex stains and are ideal for home or commercial projects such as decks, fences or DIY painting jobs.
Traffic and traction
Consider where people walk, whether vehicles turn or brake there, and whether the surface is regularly wet. Dulux positions Super Grip for higher slip resistance and high-traffic contexts, while also describing relevant coloured sealers as slip resistant. These descriptions come from Dulux, not an independent ranking of traction. Product selection cannot compensate for a steep gradient, standing water or poor drainage.
Check the gradient before you buy
Dulux’s project planner sets a maximum gradient of 1:8 or 7° for its Concrete & Paving products and says not to use them above that limit because of slip risk. In ratio terms, 1:8 means one unit of rise over eight units of horizontal distance. The two expressions are the planner’s stated limit; they are not a guarantee that every surface below the limit is safe in every weather condition.
How to make a practical check
- Choose the steepest line that people or vehicles will actually use.
- Measure a known horizontal run and the vertical rise over that run with a level, straightedge or suitable surveying method.
- Calculate rise divided by run and compare it with the 1:8 limit, or measure the angle if you have an inclinometer.
- Include transitions, ramps and local low spots rather than measuring only the middle of the slab.
If the result is steeper than 1:8 (7°), follow the planner’s advice and seek specialist guidance. Do not try to make an excluded slope acceptable by adding a more textured finish.
A complete DIY workflow
- Map the project. Record each area, its material, condition, gradient, drainage and intended traffic. Separate bare, sealed and failing sections.
- Confirm suitability. Check the project planner, current product pages and data sheets for the exact substrate and finish. Stop if the gradient exceeds 1:8 (7°) or if the slab has unresolved structural or moisture problems.
- Repair before coating. Remove loose material and address cracks, failed joints, drainage problems or movement with methods appropriate to the substrate. A decorative coating is not structural repair.
- Clean using the correct route. Use the bare-concrete preparation for a bare slab and the sealed-surface cleaner for a sealed or previously coated surface. Pressure-wash where directed and manage runoff.
- Allow the surface to reach the specified condition. Clear pooled water and observe the label’s drying, temperature and weather requirements. Exterior work should not be scheduled around rain or overnight dew when the product directions prohibit it.
- Prime with the matching product. Apply the primer intended for the substrate, at the stated coverage and recoat interval. Do not mix preparation stages from unrelated systems without confirmation.
- Lay out the finish. Decide where wet edges, joins and colour changes will fall. Have enough material from compatible batches where possible, and use the dedicated roller unit for Crushed Pebble Effect if that is your chosen finish.
- Apply the topcoat exactly as directed. Respect coats, film thickness, application tools, drying and recoat times on the current label. Avoid adding water, texture or additives unless the manufacturer permits it.
- Protect the curing surface. Keep pedestrians, vehicles, furniture and wash water off the area for the period specified by Dulux. Resume use only when the product directions allow it.
Common failure modes and fixes
New coating peels from a clean-looking slab
Likely causes include residual oil, dust, laitance, a glossy old sealer or the wrong primer. Return to the substrate diagnosis, remove failed material, repeat the specified cleaning and use the primer matched to the surface. Do not simply add another topcoat over the loose film.
Best Value
- 2 Inch Angled Paint Brush for Precision Cutting-In – Designed for clean, sharp lines around trim, baseboards, ceilings, corners, and detailed edge work. The perfect size for control and coverage.
- Value 3-Pack for Pros & DIY Projects – Includes three professional 2-inch angled sash brushes — ideal for contractors, remodelers, and homeowners tackling multiple rooms or repeat paint jobs.
- Smooth Results on Walls, Trim & Cabinets – Great for interior wall painting, cabinet edges, furniture projects, and trim work where a smooth finish and crisp control matter most.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
Patchy colour or visible overlaps
Uneven porosity, inconsistent film thickness, working beyond a wet edge and different substrate repairs can all change the appearance. Plan manageable sections, maintain the stated coverage and keep the application sequence consistent. A tinted finish can still show the concrete’s texture and repairs.
Water remains in hollows
Standing water points to drainage or level issues that coating alone does not solve. Remove pooled water before priming as the sealed-surface instructions require, then decide whether the underlying fall needs repair. Persistent dampness should be investigated before the system is applied.
A high-traffic area feels unsafe
Review the gradient, drainage, contamination and chosen finish. Super Grip may be the range’s option for higher slip-resistance needs, but the 1:8 (7°) exclusion still applies and no coating guarantees safe use in every condition.
Recommended Free Tools
Prices, stock and technical documents
The available material does not establish a current price, a cost saving versus hiring a contractor, independent durability results or verified marketplace listings. Treat “affordable” as a project question to calculate locally, including cleaner, primer, finish, tools, repairs and preparation time. A smaller materials bill can be outweighed by correcting a failed coating.
Dulux directs customers to stockists for availability. Before purchase, verify the exact finish, tint base, pack size, regional stock and compatible preparation products. Product pages provide access to product data sheets and safety data sheets; read them alongside the container label, especially for personal protective equipment, ventilation, pressure-washing runoff and disposal.
Use this decision checklist
- Have you identified the substrate as bare, sealed or previously coated?
- Are peeling and flaking areas removed or professionally assessed?
- Have oil, grease, dirt and pooled water been dealt with using the specified preparation product?
- Is the primer matched to the substrate rather than chosen only by colour or convenience?
- Does the finish suit the desired look: matt, satin, decorative pebble effect or clear?
- Does the use case call for the higher-traction option, and is the drainage adequate?
- Is the steepest section at or below 1:8 (7°)?
- Have current labels, data sheets, safety sheets and local stock been checked?
When those questions have clear answers, Dulux Concrete & Paving offers a coherent DIY route from surface preparation to final appearance. The result depends less on choosing a fashionable colour than on correctly identifying the existing surface, completing both preparation stages and refusing unsuitable slopes.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problems
