Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteThatPainter is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
Epo Shield WB is a clear or coloured, water-based epoxy floor coating from ConPell. The published technical data identifies 40% volume solids, a 1:1 mix ratio by volume, approximately 45 minutes to one hour of pot life at 25°C, a 6–8 hour recoat window at 25°C and 50% relative humidity, and seven days to full cure under the same conditions. The Architecture & Design listing describes a semi-gloss finish and says the coating can meet an R10 slip rating when used with CONPELL 400 non-slip additive.
As an Amazon Associate I earn from qualifying purchases.
Those figures are supplier or publisher statements, not independent test results. “Low VOC” is used in the product description, but the available material does not publish a numerical VOC value. Anyone specifying the product should obtain the current ConPell technical data sheet and safety data sheet before treating any figure as a contractual, regulatory or compliance specification.
Recommended Free Tools
What Epo Shield WB is
Epo Shield WB is presented as a high-performance, water-based epoxy floor coating supplied in clear and coloured versions. Water-based describes the carrier system; it does not, by itself, establish a particular VOC concentration, emissions certification, chemical-resistance rating or suitability for a specific building standard.
#1 Best Overall
- COMPLETE 5-PIECE BRUSH SET FOR EVERY PAINTING TASK — Includes 1 Inch Flat, 1.5 Inch Angle, 2 Inch Flat, 2 Inch Angle Stubby, and 2.5 Inch Angle brush giving you every size professional painters use daily. Get all 5 for less than the price of a single brush from hardware store brands — professional grade performance at a fraction of the cost. Perfect for walls, trim, cabinets, doors, furniture, and detailed cutting-in work on any project.
- ZERO BRISTLE LOSS — GUARANTEED BY PRECISION ADHESIVE BONDING — Every bristle is locked in place with precision-set adhesive that keeps them in the brush — not in your paint job. The coated steel ferrule provides structural support while the adhesive bond ensures clean performance on every stroke. Premium SRT synthetic filaments load more paint and release it evenly for a smooth streak-free finish on walls, ceilings, and trim. Works with latex, oil-based paint, primer, sealer, and wood stain.
- INCLUDES THE ANGLE STUBBY MOST SETS LEAVE OUT — Professional painters know the 2 Inch Angle Stubby is the go-to brush for tight cabinet interiors, window sashes, inside corners, and detailed trim where standard angle brushes are too long. Combined with the 1.5 and 2.5 inch angle sash brushes you have precision cutting-in covered at every scale — baseboards, crown molding, door casings, and ceiling lines.
- FLAT BRUSHES FOR BROAD SMOOTH COVERAGE ON ANY SURFACE — The 1 and 2 inch flat brushes deliver even coverage on walls, furniture, shelving, doors, fences, decks, and wood surfaces. Ideal for applying primers, stains, varnishes, polyurethane, and specialty coatings. Solid wood handles provide all-day comfort and control for both professional contractors and weekend DIY homeowners tackling interior or exterior painting projects.
- TRUSTED BY PROFESSIONAL PAINTERS AND CONTRACTORS NATIONWIDE — Pro Grade delivers professional-grade results at a price that makes sense for crews who go through brushes on every job. Ideal for property managers, remodeling contractors, apartment turnover crews, maintenance teams, and commercial painting operations. Backed by thousands of verified reviews from working painters. Washable and reusable for multiple projects.
The product is described as semi-gloss. That appearance may suit areas where a reflective, cleanable finish is wanted without the visual character of a high-gloss resin floor. The clear and coloured versions are not identical in the published physical data, so the selected variant should be named in a specification rather than treating “Epo Shield WB” as one undifferentiated formulation.
ConPell is identified in the listing as being based in Queensland, Australia. The Architecture & Design page provides a route to an Epo Shield WB clear technical data sheet and a supplier enquiry. It does not establish current stock, pack sizes, delivery coverage or online-marketplace availability.
Published Epo Shield WB specifications
The following figures come from captured ConPell technical-sheet content. Temperatures, humidity and the clear-versus-coloured distinction are part of the figures and should remain attached whenever they are copied into a project document.
| Property | Published value | Qualification |
|---|---|---|
| Product type | Clear or coloured water-based epoxy floor coating | Manufacturer description |
| Volume solids | 40% | Manufacturer data; application coverage is not stated in the captured material |
| Weight solids | 50% coloured; 45% clear | Manufacturer data |
| Specific gravity | Approximately 1.25 at 25°C; approximately 1.06 for clear | The sheet distinguishes the clear value; confirm the exact variant and test basis in the current revision |
| Approximate viscosity | 2,000 cps | Manufacturer estimate; measurement conditions are not shown in the captured text |
| Mixing ratio | 1:1 by volume | Use the current product instructions and the supplied component labels when batching |
| Pot life | Approximately 45 minutes to one hour at 25°C | Working time after mixing; actual life can change with temperature, batch size and site conditions |
| Recoat time | 6–8 hours at 25°C and 50% relative humidity | Published interval, not a promise for colder, hotter, wetter or poorly ventilated conditions |
| Full cure | Seven days at 25°C and 50% relative humidity | Published cure condition; do not assume full service readiness before the specified cure without written confirmation |
| Finish | Semi-gloss | Architecture & Design listing description |
How to read the solids figures
Volume solids indicate the proportion of the mixed coating that remains as film-forming material after the volatile portion leaves. A 40% value can help a specifier compare products, but it does not provide a coverage rate without a target dry-film thickness, application method and substrate profile. Do not turn the percentage into an estimated square-metre yield unless ConPell supplies that calculation for the chosen system.
The weight-solids difference matters when clear and coloured versions are compared. The published values are 50% by weight for coloured material and 45% for clear material. Specific gravity also differs: approximately 1.25 at 25°C is stated for the general or coloured material, while approximately 1.06 is stated for clear. Confirm which number belongs to the product code being ordered.
Rank #2
- Great Value Pack Artist Paint Brushes: Soucolor 20 brushes in 10 sizes professional paintbrushes set — no shedding, holds paint well, cleans easily, Acrylic, watercolor, oil, gouache, Halloween pumpkin decoration & face painting, rock painting, ceramics. Fantastic high quality gifts for creative, artistic siblings to share!
- Awesome Set of Paint brushes: Professional paint brushes can cover all of your needs. The multi-purposed brushes are ideal for Watercolor, Oil, Gouache, enamel, Acrylic Painting, Body, Nail, Face Painting, Miniature, Model, Wood, Glass, Cup, Ceramic, Fine work, Art class, Craft Art Painting, DIY Art Crafts etc.
- Soft and long-lasting: The bristles are soft and strong, with nickel metal ferrules and blue wooden handles. After cleaning, the bristles will become soft and fluffy again and will not fall off.
- Easy to clean: it’s very convenient to Wash well in soap and water. Retain shape after drying. the brushes hold up very well. Nice selection to beginners and professionals. Keep them clean and they last a long time.
- Halloween Pumpkin Ceramic Crafts Supplies: A Great painting gift for family, friends, kids, girls, women, student, classmate, teacher. For using in school, travel or used in the home and office.
Mixing and working time
A 1:1 ratio by volume means the two components are measured in equal volumes, not equal weights. Use graduated containers or the manufacturer’s supplied packaging as directed; substituting a weight ratio can change the cure and performance. The stated 45-minute-to-one-hour pot life begins after the components are combined and is measured at 25°C. A large mixed mass can heat itself and lose usable working time faster than a small batch, so the current instructions should govern batch size and application practice.
Recoat and cure planning
At 25°C and 50% relative humidity, the published recoat window is 6–8 hours. This is a scheduling window, not a universal clock. Surface temperature, airflow, film thickness and humidity can move the practical interval. The listed full cure is seven days under the same 25°C and 50% relative-humidity condition. Plan protection from traffic, water, cleaning and chemical exposure until the coating manufacturer confirms the relevant service stage for the exact system.
Free tools Windows power users keep installed
One-click scans. No signup required.
What “low VOC” does—and does not—tell you
The product title and summary use the phrase “low VOC,” but the captured sources do not show a numerical VOC concentration for Epo Shield WB. No VOC number should be inferred from the 40% volume-solids figure, the fact that the coating is water-based, or a generic environmental claim.
“Low VOC” is not, by itself, a certification, a health-safety guarantee or proof of compliance with a particular Australian, state, national or project rating scheme. Before approval, request a current product-specific technical data sheet and safety data sheet that state the VOC basis and units, such as grams per litre of mixed product, if that information is required. Also ask which test method, component ratio and regulatory jurisdiction apply. Do not claim a Green Star outcome or another credit unless the responsible scheme and current evidence support it.
Finish and the R10 slip statement
The Architecture & Design listing says Epo Shield WB can be applied to meet an R10 slip rating when CONPELL 400 non-slip additive is added. This is a supplier-listing claim tied to a named additive; it should not be rewritten as an inherent rating for the unmodified coating.
Rank #3
- 【All sizes of art brushes】: The 10 sizes of multi-functional brushes have various shapes, making the mixing color easier, which is very suitable for artists, students, teenagers, children and painters at all levels. Wonderful Present ideas for friends and family who like painting!
- 【general brush set】: Professional paint brush can meet all your needs. Multifunctional brush is very suitable for watercolor, oil, gouache, acrylic painting, body, nail, face painting, miniature, model, ceramics, arts and crafts painting, etc.
- 【high quality process】: It is designed with anti falling bristles, anti-rust nickel ferrule and solid wood handle. You can use the brush to focus on the painting and always be creative.
- 【easy to maintain】: After using the brush, it is very convenient to clean the brush with warm soapy water and reshape the tip of the brush. Air dry the brush and place it on top of the top for long use.
- 【100% satisfaction guarantee - buy now】1 packs of set brushes, you can also get friendly customer service, any questions feel free to contact us, within 24 hours to help you! There is no risk in buying our paint brush kit.
An R10 decision depends on the tested system, including the resin formulation, additive quantity and distribution, film build, substrate, curing, contamination and the test method. For a project where slip resistance is a compliance requirement, request current test or certification documents for the exact Epo Shield WB-and-additive system, substrate and application method. Keep the additive, finish specification and required rating in the same schedule so a contractor cannot substitute a smooth or differently broadcast finish without approval.
Where the product may fit
The Architecture & Design page describes ConPell’s broader flooring range in commercial, industrial, institutional and food-related settings. Examples listed there include showrooms, offices and retail areas, clean and wash rooms, food preparation and processing, pharmaceutical and laboratory facilities, hospitals, schools, industrial kitchens, and warehouses or distribution areas.
That is portfolio-level context, not a product-specific approval list. Before assigning Epo Shield WB to one of those environments, obtain confirmation for the actual substrate and exposure. A sensible suitability review asks for:
- Substrate types and preparation requirements, including whether concrete moisture, existing coatings or repairs are acceptable.
- Expected traffic, impact, abrasion and cleaning regime.
- Exposure to water, oils, food materials, disinfectants, solvents, acids or other chemicals.
- Hygiene, slip-resistance and regulatory requirements for the jurisdiction.
- Compatibility with primer, repair mortar, non-slip additive and any topcoat in the proposed build-up.
- Limits on application temperature, relative humidity, dew point, ventilation and recoat timing.
Without those confirmations, the broad setting examples should be treated as places to investigate, not as a blanket warranty that Epo Shield WB is suitable for every floor in every listed facility.
A practical specification workflow
- Obtain current documents. Download the latest Epo Shield WB technical data sheet and safety data sheet directly through ConPell or its authorised enquiry route. The captured sheet’s revision date was not visible, and the direct PDF page returned a verification screen, so confirm that the document is current before issuing a tender.
- Define the service brief. Record the substrate, area, traffic, cleaning chemicals, wet or dry exposure, required appearance, slip class and handover date. This prevents a generic “low VOC epoxy” description from hiding performance requirements.
- Select clear or coloured material. Name the exact variant because the published weight solids and specific gravity differ. Confirm colour, gloss expectation, batch consistency and whether a clear system will expose substrate variation.
- Build the programme around site conditions. Use the 45-minute-to-one-hour pot life and 6–8 hour recoat figure only as the 25°C, 50% relative-humidity reference. Add contingency for cooler temperatures, higher humidity, larger batches, restricted airflow or thicker films.
- Specify slip treatment explicitly. If R10 performance is required, identify CONPELL 400 additive, the required broadcast or incorporation method, and the documentation needed to prove the tested system. Do not leave “non-slip” as an unquantified site decision.
- Check system compatibility. Ask ConPell to confirm the approved primer, substrate preparation, repair materials and any topcoat. A resin can perform well in isolation yet fail as part of an incompatible or incorrectly prepared build-up.
- Plan acceptance and protection. Define visual acceptance, film defects, slip documentation, cleaning restrictions and the point at which normal traffic is allowed. The published seven-day full cure at 25°C and 50% relative humidity should be retained in the programme unless ConPell provides a different, documented service criterion.
- Verify supply. Confirm component packaging, shelf life, batch availability, delivery to the project location and replacement arrangements. The listing supplies an enquiry path but does not verify current inventory or shipping.
How to compare Epo Shield WB with another floor coating
A fair comparison should use the same substrate, exposure and system build-up. A lower price or a shorter advertised dry time is not meaningful if the competing product uses a different film thickness, test method or slip treatment.
Free tools Windows power users keep installed
One-click scans. No signup required.
Rank #4
- Bates paint brushes come in a convenient 6 pieces with 3 flat and 3 angled bristle styles, including (1”, 1.5”, 2”) flat and (1.5”, 2”, 2.5”) angled bristles, perfect for tackling any surface painting or staining job.
- The sturdy natural bristles of each brush are designed to hold more paint, creating a smoother finish with fewer streaks and saving you time on the job.
- The lightweight wooden handles provide extra comfort and ease during long painting processes like walls, trims, cabinets, and doors.
- These versatile brushes are ready-to-use, easy to clean, and can be reused multiple times, making them economical as well as reliable tools for any painting project.
- Bates paint brushes can be used for both oil-based paints as well as latex stains and are ideal for home or commercial projects such as decks, fences or DIY painting jobs.
| Comparison axis | Questions to ask | Why it matters |
|---|---|---|
| Substrate and preparation | Is the product approved for the existing concrete, moisture condition and primer? | Preparation and compatibility often determine adhesion more than the resin name. |
| Clear versus coloured finish | Which variant is being compared, and are solids, density and appearance equivalent? | Epo Shield WB’s published clear and coloured values differ. |
| Solids and coverage | What are volume solids, target thickness and verified coverage? | Solids alone do not establish square-metre yield. |
| Working and cure schedule | What pot life, recoat interval and service cure apply at the project’s temperature and humidity? | Labor and handover dates depend on real site conditions. |
| Slip performance | Is the rating for the unmodified coating or a complete additive system? | The R10 statement for Epo Shield WB is linked to CONPELL 400 additive. |
| VOC evidence | Is there a product-specific numerical value, test method and jurisdictional basis? | “Low VOC” wording alone cannot answer a compliance question. |
| Durability and resistance | What abrasion, chemical, impact, water and cleaning data apply? | Portfolio application examples do not replace exposure-specific evidence. |
| Documentation and supply | Are current technical documents, packaging and delivery available for the project? | A specification is only useful if the approved formulation can be supplied. |
The available material does not establish competitor performance or rank alternative coatings. Use the comparison axes above to obtain like-for-like evidence rather than assuming that every “water-based epoxy” has the same cure, solids, slip or emissions profile.
Common specification mistakes and their fixes
Turning “low VOC” into a number
Mistake: inserting an assumed grams-per-litre value or claiming certification. Fix: leave the numerical field unfilled until a current Epo Shield WB document states the value, basis and jurisdiction.
Using the seven-day cure in every climate
Mistake: scheduling full use seven days after application regardless of conditions. Fix: retain the published condition—25°C and 50% relative humidity—and obtain adjusted guidance when the site differs.
Calling the base coating R10
Mistake: omitting the additive and test-system qualification. Fix: specify CONPELL 400 and request current evidence for the complete installed system.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Applying portfolio claims to this formulation
Mistake: assuming that a hospital, laboratory, food-processing or warehouse example on the broader ConPell page is an approval for Epo Shield WB. Fix: obtain product-specific confirmation for hygiene, chemicals, traffic and substrate.
Best Value
- 2 Inch Angled Paint Brush for Precision Cutting-In – Designed for clean, sharp lines around trim, baseboards, ceilings, corners, and detailed edge work. The perfect size for control and coverage.
- Value 3-Pack for Pros & DIY Projects – Includes three professional 2-inch angled sash brushes — ideal for contractors, remodelers, and homeowners tackling multiple rooms or repeat paint jobs.
- Smooth Results on Walls, Trim & Cabinets – Great for interior wall painting, cabinet edges, furniture projects, and trim work where a smooth finish and crisp control matter most.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
- Works with Latex Paint, Oil-Based Paint & Stains – Premium synthetic filaments hold more paint, reduce streaks, and provide a clean finish with latex paints, oil coatings, and wood stains.
Relying on an old or inaccessible data sheet
Mistake: copying values without checking revision status. Fix: request the current controlled document and record its issue date in the project file.
Assuming online availability
Mistake: promising marketplace stock, delivery or a particular pack size. Fix: confirm those commercial details directly with ConPell for the destination and schedule.
Availability and documentation
The Architecture & Design listing identifies an Epo Shield WB clear technical data sheet download and a supplier enquiry route. ConPell is identified in Queensland, Australia. The available information does not verify current inventory, pricing, pack sizes, delivery lead times or an Amazon listing for this exact formulation.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteFor a purchase or specification, ask the supplier to confirm the product code, clear or coloured version, component packaging, shelf life, latest technical-sheet revision, safety documentation, approved accessories and delivery jurisdiction. Keep those confirmations with the contract documents so the installed material can be traced to the approved system.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
